Ski Resort

Why the Ski Resort Needs Professional Ice Systems

Whether for indoor ski resorts or outdoor ski resorts, a professional, stable and efficient all-weather snow making system is the core rigid demand for venue operation. The core pain points of the industry are as follows:

Operation lifeline completely depends on stable snow making capacity

Indoor ski resorts have no natural snow source, and outdoor ski resorts are greatly affected by season, climate and temperature. Without a reliable all-weather snow making system, the venue cannot operate normally at all and faces huge losses. Traditional snow making equipment has high requirements for environmental temperature and humidity, with low snow making efficiency and unstable snow quality, which cannot meet the all-weather and full-cycle operation needs of the venue.

Long installation and deployment cycle and high cost:

Traditional snow making equipment requires a lot of on-site installation and debugging work, which not only has a long cycle and high labor cost, but also seriously affects the opening progress and daily operation of the venue. Especially for opened venues, long-term shutdown for installation and debugging will cause direct revenue loss.

High operation and maintenance cost:

Traditional snow making equipment requires dedicated personnel to be on duty 24 hours a day, resulting in extremely high labor costs. Non-automatic equipment requires manual control of water inlet, ice making, ice shedding and other processes, which has a high operation threshold. Non-professional personnel are very easy to operate incorrectly and lead to equipment failure, which further increases the operation and maintenance cost.

Unstable snow quality directly affects passenger flow and reputation:

Manually controlled traditional snow making equipment has large fluctuations in snow quality, snow volume and snow temperature, and uneven snow quality on the ski trails, which will seriously affect the skiing experience of tourists, lead to the loss of passenger flow and decline of reputation, and directly affect the revenue of the venue.

Untimely after-sales response causes fatal losses:

Especially during the peak holiday season, ski resorts have a large passenger flow. Once the snow making system breaks down and stops running, the ski trails cannot be used normally, which will directly lead to the closure of the venue and tourist complaints, resulting in huge revenue and brand losses. Traditional equipment suppliers have slow after-sales response and long maintenance cycle, which cannot meet the year-round operation needs of the venue.

ICESTA creates customized solutions of All Weather Snow Making System for indoor and outdoor ski resorts.

The core configuration and advantages for the Window of the World Shenzhen project are as follows:

Core Product Parameters & Configuration

ICESTA All Weather Snow Making System

Pre-installation & Debugging:

The whole system completes the full process of installation, debugging and performance testing in the factory. On site, it only needs to fix the equipment, connect the ice making system pipelines, water and electricity to put into use quickly, with convenient and efficient installation.

Intelligent Control System:

All components in contact with ice and water are made of food-grade 304 stainless steel, featuring no sanitary dead corners, easy cleaning and disinfection, and full compliance with national meat safEquipped with a touch screen intelligent control system, it realizes fully automatic operation of the whole process of water inlet, ice making, ice shedding and ice output without manual intervention.ety production standards

All-weather Stable Snow Making:

Breaking through the limitations of season, temperature and climate, it can make snow stably 365 days a year under different environmental conditions, with uniform and controllable snow quality, which perfectly meets the all-weather operation needs of indoor and outdoor ski resorts.

Remote Visual Operation:

Equipped with on-site working condition camera monitoring, it supports remote visual operation and real-time equipment status monitoring on computer and mobile terminals, and can control the system operation anytime and anywhere.

Supporting Services

Free main wearing parts of the system, 24×365 all-year-round after-sales response service, and lifetime free technical support.

Core Advantages of the Solution

All-weather Stable Snow Making

Break through the limitations of temperature, humidity, season and climate, stably output high-quality snow 365 days a year, and ensure the all-weather uninterrupted operation of the venue.

Rapid Deployment & Efficient Commissioning

Pre-installed and debugged in the factory, with minimal on-site installation, which greatly shortens the installation cycle, reduces on-site installation costs, and avoids affecting the normal operation of the venue.

Fully Automatic Operation of the Whole Process

The intelligent control system realizes the automation of the whole snow making process without dedicated personnel on duty, which greatly reduces the labor operation and maintenance cost and has a low operation threshold

Stable Snow Quality to Guarantee Experience

Fully automatic and precise control of the snow making process, with uniform and stable snow quality, which perfectly meets the needs of skiing scenarios, and improves tourist experience and venue reputation.

Remote Visual Operation & Maintenance

Real-time camera monitoring + remote operation on mobile phone/computer, no need for on-site inspection, which greatly improves operation and maintenance efficiency and avoids fault risks in advance.

Full-cycle After-sales Guarantee

All-year-round after-sales response + lifetime technical support + free wearing parts, which completely solves the worries of venue operation and ensures stable operation throughout the year.

ICESTA Case Study

Client: Window of the World Shenzhen
Project Name: All Weather Snow Making System Project for Window of the World Ski Resort, Shenzhen
Construction Time: 2016
Project Location: Shenzhen, China
Application Industry: Ski Resort Operation
Core Product: ICESTA All Weather Snow Making System

ICESTA All Weather Snow Making System Solution for Window of the World Indoor Ski Resort, Shenzhen

ICESTA All Weather Snow Making System Solution for Window of the World Indoor Ski Resort, Shenzhen

ICESTA provided an integrated solution of All Weather Snow Making System for Window of the World Indoor Ski Resort in Shenzhen. Tailored for the full-cycle operation needs of indoor ski resorts in southern China, the system breaks through the limitations of season, temperature and climate, realizes stable snow making 365 days a year all-weather, and perfectly solves the core pain points of the venue in the whole process of snow making system installation, daily operation and maintenance, snow quality guarantee, stable operation and after-sales response.

Core value improvements brought to the client:
Greatly shortened the installation and deployment cycle. The whole system is fully pre-installed and debugged in the factory. On site, the equipment only needs to be fixed, connected with the ice making system pipelines, water and electricity to be put into use quickly, which avoids the impact of long-term on-site debugging of traditional equipment on the normal operation of the venue, and greatly reduces the on-site installation cost and construction cycle.

Realized fully automatic operation of the whole snow making process without on-site dedicated personnel, which greatly reduced the labor operation and maintenance cost of the venue. Meanwhile, the whole process of water inlet, ice making, ice shedding and ice output is intelligently closed-loop controlled, with stable and uniform snow quality, not affected by external environmental temperature and humidity, which perfectly meets the all-weather operation needs of indoor skiing scenarios, and greatly improves the skiing experience of tourists and the passenger flow reputation of the venue.

Equipped with a remote visual intelligent control system, it can monitor the on-site working conditions in real time through cameras, and support remote visual operation and real-time equipment status viewing on computer and mobile terminals. The venue management can control the system operation anytime and anywhere without on-site inspection, which greatly improves the operation and maintenance efficiency and avoids fault risks in advance.

Equipped with full-cycle after-sales guarantee service, we provide free main wearing parts of the system, 24×365 all-year-round after-sales response and lifetime technical support, which completely solves the worries of equipment failure and untimely maintenance that affect the normal operation of the venue, and ensures the stable all-weather operation of the venue throughout the year.